architecture - engineering - construction

About High-Performance Fluoropolymer Paint Coatings


High-Performance Fluoropolymer Paint Coatings

PVDF Paint Overview

High-performance Kynar 500® PVDF resin-based coatings may be defined as a thin layer of plastic film containing resin, binder and pigments that is applied to the surface of an object to provide protection and a decorative organic coating.

The primary component of paint is referred to as the resin. The type of paint comes from the resin system - Polyvinylidene Fluoride (PVDF), Polyester, Acrylic, Polyurethane or Epoxy. It is not uncommon for a coating to contain several resins, which help the coating perform to specific requirements.

Paint Classifications: Paint coatings can be classified by function, curing system, volatile components, and resin system.

Function: Function can be described as filler, surfacer, size coat, primer, tie coat and clear coat.

Curing System: Different types of curing systems include air dry, air dry/force dry, bake/cure, catalyzed, and radiation.

Volatile Components: Solvents, waterborne (water based and water reducible) and 100% solids.

Resin System: Acrylic, Epoxy, Polyester, Polyurethane, Vinyl and PVDF (often referred to as Kynar or Kynar 500. Kynar 500® is not a finished paint, it is a trade name for PVDF (polyvinylidene fluoride) resin, as is Hylar 5000®. Kynar 500® is a registered trademark belonging to Arkema Inc.

The exact composition of a particular paint coating is often complex and proprietary. In general most paints contain resins, pigments, reducers and additives.

Resin: Resins are the compounds in the paint that form the film and hold the pigment in place. The resin system incorporated into the paint is the determining factor in the specific characteristics and performance properties. In the architectural industry, two primary resin systems are involved in refinishing of metals: fluoropolymer based (PVDF, Kynar) or "baked enamel" type, usually composed of acrylic or polyester resins.

Pigments: Pigments are the material added to the paint to give it color or to enhance certain physical properties of the coating. The selection of pigments is done on the basis of physical needs, durability, gloss, color fastness and chemical exposure. Pigments are both naturally occurring as well as synthetic.

Reducers: Reducers are used to serve different purposes. Using an active solvent will reduce the viscosity. Diluent solvent is used to extend a solution, but definitely weakens the power of the active solvent. Thinner solvent can extend a solution but does not impair the power of the active solvent.

Additives: Additives are usually paint type and specification specific. These can be added to enhance gloss, hardness and other characteristics.


Find more FAQ's

How is Paint Made

Formulation of Paint

Paint is in-house blended to meet the precise requirements of each unique project.

Linetec's color matching capabilities are unparalleled. Utilizing the latest technologies to analyze and formulate thousands of color variations ensures creation of the exact color specified.

Paint Composition

When people describe paint systems, they are referring to the resin system incorporated in the paint.

The resin system determines the performance and properties of the paint. A typical gallon of paint is 10% pigment, 20% resin, and 70% solvent (reducers and additives).

High-Performance Kynar Coatings

Kynar 500® PVDF resin-based coatings provide protection against weathering, aging and pollution on buildings around the world.

The capability of Kynar 500 resins to deliver long-lasting durability is unmatched in the industry, and is still the architect's first choice.

Strengths & Limitations

The performance strengths and limitations of paint are summarized as follows:

Strengths of Paint

  • Color Retention (UV resistance)
  • Salt-spray resistance
  • Vast array of color choices
  • Paint protects and maintains the structural integrity of the aluminum
  • Field touch-up / repainting capabilities
  • Small-batch and custom color capabilities - fast and cost effective

Limitations of Paint

  • Fair hardness
  • Cost of high-performance products
  • Potential for inconsistent appearance of "metallic" paints
  • Solvent based paints are not environmentally friendly without an oxidizer

Request for Information / Request a Catalog from Linetec about High-Performance Fluoropolymer Paint Coatings
(Please check companies and/or products above.)
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.  


05 05 13 - Shop-Applied Coatings for Metal
09 96 56 - Epoxy Coatings
09 96 63 - Textured Plastic Coatings