architecture - engineering - construction
AECinfo.com
  News  

Sherwin-Williams Protective & Marine Coatings has introduced Cor-Cote® HT FF

 
  Subscribe to FREE newsletter  Dec 23, 2010

Sherwin-Williams Protective & Marine Coatings has introduced Cor-Cote® HT FF for high temperature immersion and atmospheric applications. Ideal for tank linings and piping under insulation at both ambient and high temperatures, this epoxy novolac amine is designed for service with gasoline, fuel oil, diesel fuel, crude oil, ethanol and other hydrocarbons.

The coating contains micaceous iron oxide (MIO) for enhanced anti-corrosion and edge protective properties. The flakes help form an impermeable barrier while increasing temperature resistance. A high-solids (90 percent), chemically-resistant lining, Cor-Cote HT FF is resistant up to 450 degrees F in a dry service environment and will perform in areas subject to wet/dry cycling up to 300 degrees F.

Cor-Cote HT FF is a self-priming coating, providing high build and edge retention in a single coat. By eliminating the need for a second coat, the product provides a faster return to service. It can be applied to steel, stainless steel or concrete surfaces.

"The Cor-Cote HT FF technology eases the task of petrochemical storage tank and pipeline maintenance," said Brad Rossetto, President and General Manager, Sherwin-Williams Protective & Marine Coatings. "Single-coat application means that facilities are back on line in a timely manner, and high temperature compatibility with piping under insulation provides peace of mind to owners."

Cor-Cote HT is available in three shades of gray, has a semi-gloss finish, and can be applied via airless or conventional spray. Brush or roller coating can be used for small areas. VOC levels are 140 grams per liter, or 1.2 lbs. per gallon.

Sherwin-Williams is a global protective and marine coatings company that delivers smarter asset protection and unmatched service and specification support to its customers from 3,900 locations worldwide. From alkyds to zincs, the company offers a complete line of time-tested, high performance coatings and systems to combat corrosion, supported by the largest group of NACE-certified coatings inspectors in the industry. With more than 140 years in business and a culture of product innovation, Sherwin-Williams today is the single source of supply for coatings solutions made to your specifications and delivered on time, every time.

For other relevant searches, you might want to try:

(09960) High-Performance Coating
(09964) Elastomeric Coatings
(09970) Coatings for Steel
(09980) Coatings for Concrete and Masonry
(09990) Paint Restoration
(13200) Storage Tank
(09 01 90.53) Maintenance Coatings
(09 01 90.92) Coating Restoration
(09 96 13) Abrasion-Resistant Coatings
(09 96 26) Marine Coatings
(09 96 33) High-Temperature-Resistant Coatings
  (09 96 35) Chemical-Resistant Coatings
(09 96 43) Fire-Retardant Coatings
(09 96 53) Elastomeric Coatings
(09 96 56) Epoxy Coatings
(09 97 00) Special Coatings
(09 97 13) Steel Coatings
(09 97 13.13) Interior Steel Coatings
(09 97 13.23) Exterior Steel Coatings
(09 97 23) Concrete and Masonry Coatings
(41 34 23) Coating Equipment