architecture - engineering - construction
AECinfo.com

About Stucco Systems

Stucco Systems

More powerful than Conventional Stucco – Sto Stucco Systems are made up of high-performance products that are designed to work together to form a superior wall cladding. These systems weigh less and can be installed faster than conventional stucco, with coatings and finishes that bridge hairline cracks to keep moisture out, enhancing the weather resistance and long term appearance of your cladding.

StoPowerwall® Stucco Systems

Fully-tested, code compliant stucco systems with excellent moisture management and comprehensive design options for a low maintenance, long lasting cladding with all of the protection and energy efficiency of StoGuard®.

StoPowerwall® Stucco Systems are advanced integrated wall systems that combine the best protective and aesthetic elements into a superior wall cladding. The systems are made-up of high-performance components including StoGuard® fluid-applied air and moisture barrier, Sto DrainScreen™ drainage mat, Sto Stucco and Sto textured finishes. Together these make a system that performs better than traditional stucco, with finishes and coatings that keep out moisture while providing a myriad of design options.

System Features

  • Air and Moisture Barrier
    Protects the wall from moisture intrusion minimizing risk of water damage to sheathing and associated repair costs.
  • Weather Resistance
    Less moisture absorption and penetration than field mixed stucco maintains a longer appearance.
  • Premium Finishes & Coatings
    Sto high performance finishes and coatings provide superior weatherability and resistance to UV fading, mold and mildew.

StoPowerwall® ci – Inbound Insulation

Premium stucco system with superior thermal performance and air and moisture control

StoPowerwall® ci is a premium stucco system which provides heat, air and moisture management along with the best protective and aesthetic elements for a truly superior wall cladding. It combines StoGuard® air and moisture barrier, a drainage mat, inbound constructed Dow Type IV XPS Insulation Board, StoPowerwall® Stucco and Sto textured finishes into an integrated system that supports both green building and moisture protection across all climate zones, from cold to hot and humid. In addition, Sto Corp’s wide selection of finishes and coatings offer a limitless number of design options for high impact curb appeal.

StoPowerwall® ci – Outbound Insulation

Premium stucco system with superior thermal performance and air and moisture control

StoPowerwall® ci is a premium stucco system which provides heat, air and moisture management along with the best protective and aesthetic elements for a truly superior wall cladding. It combines StoGuard® air and moisture barrier, a drainage mat, outbound constructed Dow Type IV XPS Insulation Board, StoPowerwall® Stucco and Sto textured finishes into an integrated system that supports both green building and moisture protection across all climate zones, from cold to hot and humid. In addition, Sto Corp’s wide selection of finishes and coatings offer a limitless number of design options for high impact curb appeal.

StoPowerwall® DrainScreen™

High performance stucco system with excellent moisture protection

StoPowerwall® DrainScreen™ is a high performance stucco system with excellent moisture protection. It is comprised of the following main components: StoGuard® air and moisture barrier, StoPowerwall® stucco and Sto textured finishes.
StoPowerwall® DrainScreen™ is a fibrous resin drainage mat that is placed between the cladding and the StoGuard® seamless waterproof air barrier system. Should water ever reach the back of the cladding, it can drain from the wall assembly via the drainage mat channels, which also helps speed the drying of moisture-laden air (water vapor) that can accumulate in the wall assembly. Drainage and drying can be particularly important in hot and humid climates and in areas with wind-driven rain.

StoPowerwall® ExtraSeal®

Air and Moisture Barrier with Direct-Applied Stucco System

StoPowerwall® ExtraSeal™ incorporates Sto ExtraSeal, a Portland cement-based Air and Moisture Barrier component for use beneath Direct-Applied StoPowerwall stucco brown coats. It is applied by trowel or pump to vertical, above grade, Concrete and Concrete Masonry Units (CMU).

StoPowerwall®

Portland cement stucco with continuous air and moisture barrier, drainage, and high performance finish

StoPowerwall® is a stucco wall assembly with continuous air and moisture barrier and moisture drainage. It combines the strength and durability of traditional stucco with StoGuard moisture protection and Sto high performance finishes and can be used in Commercial and Residential applicaitons.

Brochures | 3-Part CSI specifications

Brochures for Stucco Systems

Brochures for Stucco Systems
Preview Description Format Size Open
Documentation Center
Specifications, System Bulletins, Details, Detail Booklet, Technical Hotlines, Installation and Repair, White Papers, Brochures & Case Studies, Videos, Product Bulletins, LEED, Code Reports, SDS, Color Collections
  504 kB Open

3-Part CSI specifications for Stucco Systems

3-Part CSI specifications for Stucco Systems
Description Format Size Download
Specifications
Specialty Systems, reStore, Air and Moisture Barriers, Coatings, Backup Wall System, Stucco Systems, Cement Board Stucco Systems, Continuous Insulation Systems
  504 kB Download


Request for Information / Request a Catalog from Sto Corp. about Stucco Systems
 
(Please check companies and/or products above.)
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.  
     


News archive:
Stucco Systems from Sto Corp. (Mar 22, 2019)

09 24 23 - Cement Stucco