architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share

About Cable railing accessories

Cable railing accessories

BRACE CONNECTOR PLUG FOR FLAT RUNS

Plastic plugs with screws for attaching cable braces to wood or aluminum frame and wood deck. Available in bags of 20.

Brace connector for flat runs

BRACE CONNECTOR PLUG FOR STAIR RUNS

Plastic plugs with beveled bottoms for attaching cable braces to wood or aluminum frame on a stair rake. Available in bags of 20.

Brace connector for stair runs

CABLE BRACE FLOOR PLATE

FLP-CBS
For mounting cable braces to top or bottom rail or deck.
2-1/4” x 1-1/4” x 1/4”, #4 Finish Stainless Steel

cable brace stainless steel floor plate image.

STAINLESS STEEL SPACERS

Used between two structural steel posts or flat bar for "double end post" type construction.

stainless steel spacers

stainless steel spacers dimensions

BEVELED WASHERS (FOR FLAT SIDED FRAMES ONLY)

For use with Invisiware ® Receivers, Radius Ferrules, Push-Lock tensioners and Pull-Lock fittings on stairways or slopes where you need to drill your end post holes at an angle

beveled washers

stainless steel spacers dimensions

42" LONG ANODIZED ALUMINUM CABLE BRACE

CB-42-AN-AL-13 - For Flat Runs
3/4" x 3/4" tube, 42" long for cutting down to any size rail height. Holes pre-drilled at 3-1/8" on center, 13 holes total. For use between structural posts to keep cables code compliant on level runs. Use cable brace plugs to attach to top and bottom rail or deck.
CB-42-AN-AL - For Stair Runs
3/4” x 3/4” tube, 42” long for cutting down to any size rail height. Comes undrilled so slots can be field-drilled to match cable array.

Anodized aluminum cable brace

42" LONG BLACK ALUMINUM CABLE BRACE

CB-42-BL-AL-13 - For Flat Runs
3/4" x 3/4" tube, 42" long for cutting down to any size rail height. Holes pre-drilled at 3-1/8" on center, 13 holes total. For use between structural posts to keep cables code compliant on level runs. Use cable brace plugs to attach to top and bottom rail or deck
CB-42-BL-AL - For Stair Runs
3/4" x 3/4" tube, 42" long for cutting down to any size rail height. Comes undrilled so slots can be field-drilled to match cable array

Black aluminum cable brace.

36" LONG STAINLESS STEEL CABLE BRACE

CB-34.5-SS-10 - For Flat Runs
1/4" x 1" for 36" high rails. Holes pre-drilled at 3-1/8" on center, 10 holes. For use between structural posts to keep cables code compliant. Weld to metal frames; use cable brace floor plates for attaching to wood.
CBS-34.5-SS-10 - For Stair Runs
1/4" x 1" for 36" high rails. Slots pre-drilled at 3-1/8" on center, 10 slots. For use between structural posts to keep cables code compliant. Weld to metal frames; use cable brace floor plates for attaching to wood. Must be field-chamfered to match stair angle.
Order custom drilled cable brace

Stainless steel cable brace

42" LONG STAINLESS STEEL CABLE BRACE

CB-40.5-SS-12 - For Flat Runs
1/4" x 1" for 42" high rails. Holes pre-drilled at 3-1/8" on center, 12 holes. For use between structural posts to keep cables code compliant. Weld to metal frames; use cable brace floor plates for attaching to wood.
CBS-40.5-SS-12 - For Stair Runs
1/4" x 1" for 42" high rails. Slots pre-drilled at 3-1/8" on center, 12 slots. For use between structural posts to keep cables code compliant. Weld to metal frames; use cable brace floor plates for attaching to wood. Must be field-chamfered to match stair angle.
Order custom drilled cable brace

Stainless steel cable brace

CABLE GROMMETS

Cable grommets are offered for popular cable diameters of 1/8”, 3/16” and 1/4”. They help prevent rust in exterior applications or elsewhere where moisture is a factor, by providing a barrier between the cable and the painted or powder-coated surface through which the cable is drawn when being installed. They help prevent noise in interior applications by dampening vibration in the cables. Ultra-tec® cable grommets are installed (after the paint or powder coating is applied) into holes in intermediate posts, cable braces and, in the case of the Invisiware® Radius Ferrule, Push-Lock®, and Pull-Lock® fittings into the end post holes through which the cable exits. They are offered in black UV resistant Delrin®. 

cable grommets

cable grommets table

ISOLATION BUSHING

When placed over the fitting before inserting into the post, this bushing is used to prevent bimetallic corrosion. 
Order B-687-562-437 

cable isolation bushing

CROSS-CLAMP TR4-CCA

For 1/8" diameter cable/rod, great for trellises-and to build substitute intermediate posts to keep cable from displacing.

cross clamp

STAINLESS STEEL CLEANER AND PROTECTANT

E-Z Clean Dissolves minor corrosion , then leaves a protective coating that lasts for months.
Includes an 8-oz. spray-on rust and stain remover and a 4-oz. bottle of protectant.

stainless steel cleaner and protectant

Brochures | 3-Part CSI specifications | CAD details

3-Part CSI specifications for Cable railing accessories

3-Part CSI specifications for Cable railing accessories
Description Format Size Download
CSI Specifications
Download CSI Specifications for Decorative Metal Railings.
DOC/PDF   Download

CAD details for Cable railing accessories

CAD details for Cable railing accessories
Preview Description Format Size View Download
CAD Details
Drawings and design links
Various     Download


Request for Information / Request a Catalog from The Cable Connection about Cable railing accessories
 
(Please check companies and/or products above.)
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.  
     
 
 



Source: http://thecableconnection.com

05 15 00 - Wire Rope Assemblies
05 15 16 - Steel Wire Rope Assemblies
05 50 00 - Metal Fabrications
05 51 00 - Metal Stairs
05 52 00 - Metal Railings
05 71 00 - Decorative Metal Stairs
05 73 00 - Decorative Metal Railings
05 73 16 - Wire Rope Decorative Metal Railings
06 43 00 - Wood Stairs and Railings
08 70 00 - Hardware
32 31 00 - Fences and Gates
45 39 00 - Fabricated Metal Product Manufacturing Equipment
45 40 99 - User-Defined Fabricated Metal Product Manufacturing Equipment