architecture - engineering - construction
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share

Use any woven fabric on sound-deadening Tectum Wall Panels


Tectum Fabri-Tough II Wall Panels are the latest innovative wall panel introduced by Tectum Inc. Combining abuse-resistant Tectum Wall Panels and a 1/16 inch, 18-pound density fiberglass facer laminated to the face of the panel with new designer fabrics, Fabri-Tough II is perfect for offices, conference rooms and any space where designer fabrics are required.

Tectum Fabri-Tough II allows designers to use any woven fabric on sound-deadening Tectum Wall Panels. Custom Fabrics and an 1/8 inch, 18 pound density fiberglass board are laminated to the face of a Tectum Wall Panel. Fabri-Tough II is perfect for offices, conference rooms and any space where noise reduction is needed and designer fabrics are desired.

Control noise efficiently, economically and attractively in open plan, closed or mixed-use space with the Fabri-Tough II Wall Panel System. Efficiently because Tectum panels are known for sound absorption and abuse-resistance. Economically because these panels are competitively priced and will last longer than ordinary, soft- base panels. Attractively because they come in your choice five designer patterns and a multitude of fabric colors that coordinate with popular contract furnishings.

Fabri-Tough II Kerfed Wall Panels have the fabric wrapped around the edge to the kerf where a plastic spline is inserted for attachment to the wall. Panel ends are square cut but can be wrapped with the fabric as an option

Fabri-Tough II Décor Panels have fully wrapped edges and are attached using 20” Z-Clips allowing for panels to be strategically placed in a space as opposed to consecutive attachment.

Fabri-Tough II Wall Panels have a flame spread of 25 or less under the ASTM E84 test method. Panel components meet the requirements of the room corner fire test (UBC 8-2 or equivalent) for use in areas not protected by automatic sprinklers.

For panels to be used in recessed areas, some field adjusting may be necessary.

For other relevant searches, you might want to try:

(09710) Acoustical Wall Finishes
(09770) Special Wall Surface
(09800) Acoustical Treatment
(09810) Acoustical Space Unit
(09830) Acoustical Barrier
(09840) Acoustical Wall Treatment
(09940) Decorative Finishes
(07 42 00) Wall Panels
  (09 77 00) Special Wall Surfacing
(09 80 00) Acoustic Treatment
(09 83 00) Acoustic Finishes
(09 83 13) Acoustic Wall Coating
(09 84 00) Acoustic Room Components
(09 84 13) Fixed Sound-Absorptive Panels
(09 84 33) Sound-Absorbing Wall Units
(09 94 00) Decorative Finishing