architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  News  

Ampco by AJW High Pressure Laminate compartment systems, gives flexibility, aesthetics, and economy

 
  Subscribe to FREE newsletter  Sep 30, 2016

AMPCO by AJW’s High Pressure Laminate components utilize NEMA GP-50 high-pressure laminate and industrial grade 45lb. density particleboard. Bonding the edges before face lamination promotes water runoff, enhances color pattern aesthetics and inhibits deterioration. AMPCO by AJW features a full range of solid designer colors, patterns and finishes.

Custom Architectural Laminate Wood Doors for Baltus House, Photo Credit: Wilsonart
Custom Architectural Laminate Wood Doors for Baltus House, Photo Credit: Wilsonart

Strengths

  • Economically priced
  • Quick ship availability
  • Large color selection
  • High graffiti resistance
  • Impact resistance
Construction Features:
  • 1-1/4” (31mm) thick pilasters
  • 7/8” nominal thick doors, panels and screens
  • Heavy duty cast chrome plated non-ferrous Zamac hinges and bracket hardware are standard
  • High Pressure Laminate bonded with structural water resistant adhesives
  • Edges bonded before face lamination
  • the following construction styles available for this material: Overhead Braced (OHB), Floor Mounted (FM), Floor to Ceiling (F/C), Ceiling Hung (C/H), and Euroline.
Optional Features:
  • 1” minimum (25mm) thick finished doors, panels and screens
  • Plywood core, AB exterior grade
  • Stainless Steel finished laminate edges on doors, panels, stiles and screens
  • Steel core pilasters
  • Stainless Steel hardware
  • Continuous Aluminum or Stainless Steel wall brackets
  • Continuous Stainless Steel hinges
  • Continuous Aluminum Aluminum Spring Loaded Hinges
  • Euroline™ hardware
  • Non Added Urea Formaldehyde core
  • Surface mount chrome or stainless steel hinges (two or three per door)
  • No sightline Hardware (Cont. Aluminum Keepers and Cont. Hinges)
LEED:
  • RECYCLED CONTENT MR 4.0
  • Formica- Pre-consumer 71% Post-consumer 2%
  • Wilsonart- Pre-consumer 71% Post-consumer 5%
  • LOCAL AND REGIONAL MATERIALS MR 5.0 (Manufactured in all locations)
  • Laminate Recovery- Asheville, NC(W); Temple, TX(W); Bakersfield, CA(F); Atlanta, GA(F)
  • Particleboard Recovery- Adel, GA; Springfield, OH
  • Hardware Recovery- Sanger, TX
  • RENEWABLE RESOURCES MR 6.0
  • Wilsonart 2%
  • LOW EMITTING MATERIALS IEQ 4.4
*(W) Wilsonart, (F) Formica

URL:
http://www.ampco.com/toilet-partitions/materials/hp-laminate/

For other relevant searches, you might want to try:

(06 48 16) Interior Wood Door Frames
(08 14 00) Wood Doors
(08 14 16) Flush Wood Doors
  (08 14 23.16) Plastic-Laminate-Faced Wood Doors
(08 14 29) Prefinished Wood Doors
(08 15 13) Laminated Plastic Doors