About Wireless Edge Systems
Wireless Edge Systems
The Miller Edge Model gate and door edge transmitter is designed to eliminate the need to hard wire sensing edges to motor controls. It is easily mounted and wired to the gate or door edge sensor. When the Sensing Edge comes into contact with an obstruction, a closed circuit signal is created and is sent to the transmitter. The transmitter relays the signal to the receiver that is wired to the stop or reverse terminals in the motor controls.
Sensing Edge Transmitters & Receivers
RBand is a monitored wireless transmitter/receiver system that eliminates the need to hard wire sensing edges. The RBand receiver can be paired with up to three transmitters/sensing edges per channel. The transmitter is built to endure rugged, outdoor environments. The RBand system features automatic channel switching and auto adjusting transmitter power regulation, helping boost signals and improve reliability, even in harsh RF environments. Models available for compatibility with most door and gate operators.
Single-Channel Wireless System
Avoid visible cords and reels with this non-monitored single-channel edge system. Designed to provide a wireless signal transmission from the sensing edge to motor controls, this reliable system has on-board diagnostics for easy setup and troubleshooting. The transmitter comes standard with a NEMA 4 weather-proof enclosure and both the receiver and transmitter have a compact design that allow for easy troubleshooting via the transparent cases.
Single-Channel Wireless System with Low Battery Alarm
Avoid visible cords and reels with this non-monitored single-channel edge system. Designed to provide a wireless signal transmission from the sensing edge to motor controls, this reliable system has on-board diagnostics for easy setup and troubleshooting. The transmitter comes standard with a NEMA 4 weather-proof enclosure and both the receiver and transmitter have a compact design that allow for easy troubleshooting via the transparent cases. The transmitter features an audible alarm that activates when the battery has 25% of its life remaining.
Two-Channel Wireless System with Optional Low Battery Alarm
Avoid visible cords and reels with this non-monitored wireless system. Designed to provide a wireless signal transmission from the sensing edge to motor controls, this two-channel edge system has on-board diagnostics for easy setup and troubleshooting. The transmitter comes standard with a NEMA 4 weather-proof enclosure and both the receiver and transmitter have a compact design that allow for easy troubleshooting. The transmitter is available with an optional audible alarm that activates when the battery has 25% of its life remaining. Specs Installation FAQ ANT-R ANT-R: Rigid Antenna, Insulated Use to increase signal reception when needed.
Brochures | 3-Part CSI specifications | CAD details
News archive:
Product From Miller Edge: Light Curtain (Oct 11, 2012)
02820 - Fences and Gate
08340 - Special Function Door
08990 - Glazed Curtain Wall Restoration
13700 - Security Access and Surveillance
08 01 44 - Operation and Maintenance of Curtain Walls
08 34 00 - Special Function Doors
28 13 00 - Access Control
32 31 00 - Fences and Gates