architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  News  

Product From Merkrete: 831 WR Water Resistant Thin Set Adhesive For Tile And Stone

 
  Subscribe to FREE newsletter  Dec 25, 2011

Merkrete 831 WR thin set is a special water resistant polymer modified portland cement thin set for installing ceramic tile and natural stone. 831 WR thin set is the perfect solution for tile installations in high moisture areas such as commercial showers, laundry rooms, pool areas, or any areas where repeat and high moister is prevalent. 831WR Thin Set combines the attributes of a superior thin set adhesive with added water resistant protection. Unlike regular thin set mortars, the water resistant qualities add an increases defense against water infiltration to sub-floors and walls.

Basic Use:

Merkrete 831 WR thin set is a special water resistant polymer modified portland cement thin set for installing ceramic tile and natural stone. 831 WR thin set is the perfect solution for tile installations in high moisture areas such as commercial showers, laundry rooms, pool areas, or any areas where repeat and high moister is prevalent.

Uses:

831WR Thin Set combines the attributes of a superior thin set adhesive with added water resistant protection. Unlike regular thin set mortars, the water resistant qualities add an increases defense against water infiltration to sub-floors and walls. It can be used as a thin set mortar for ceramic tile and natural stone for both walls and floors in interior and exterior applications. It is recommended for use in the thin set installation method for absorptive, semi vitreous, vitreous tile and impervious ceramic tile such as porcelain tile and natural stone over properly prepared masonry, concrete, cement backer board, membranes and existing ceramic tile. 831 WR thin set is suitable for both residential and commercial construction. It is recommended for use in the thin set installation method for vitreous tiles like porcelain over low or non-absorptive subfloors, and membranes

About Parex USA

Parex USA, Inc., an American Corporation based in California, is a subsidiary of the ParexGroup, a division of Materis, S.A., a French Corporation. The ParexGroup is one of the world's leading manufacturers of specialty chemicals and ready-to-use mortars for the construction industry. With over 45 manufacturing sites in 18 countries the ParexGroup employs more than 2,700 industry professionals who are the corner stone of this thriving global organization. For more information regarding Parex USA, Inc. visit www.parexusa.com.

For other relevant searches, you might want to try:

(03050) Basic Concrete Materials and Methods
(03300) Cast-in-Place Concrete
(04200) Masonry Unit
(04400) Stone
(04410) Stone Materials
(04420) Collected Stone
(04430) Quarried Stone
(04800) Masonry Assemblies
(04810) Unit Masonry Assemblies
(04850) Stone Assemblies
(06160) Sheathing
(07260) Vapor Retarder
(07270) Air Barrier
(09300) Tile
(09305) Tile Setting Materials and Accessories
(09310) Ceramic Tile
(09670) Fluid-Applied Flooring
(00 31 25.29) Existing Thermal and Moisture Protection Information
(03 05 00) Common Work Results for Concrete
(03 30 00) Cast-in-Place Concrete
(03 61 00) Cementitious Grouting
(03 62 00) Non-Shrink Grouting
(04 20 00) Unit Masonry
(04 40 00) Stone Assemblies
(06 16 00) Sheathing
(07 26 00) Vapor Retarders
(07 27 00) Air Barriers
(09 30 00) Tiling
(09 31 00) Thin-Set Tiling
(09 33 00) Conductive Tiling
(09 34 16) Waterproofing-Membrane Quarry Tiling
(09 62 48) Acoustic Flooring
(09 67 00) Fluid-Applied Flooring
(09 83 00) Acoustic Finishes