architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share

Ruskin: Classic Damper Inspector™ & Webinars

 

The Classic Ruskin Inspector™ is designed with the user in mind, providing an advanced tool that simplifies installation and commissioning of fire/smoke dampers.


The FSDPC panel operates on an embedded platform and utilizes solid state technology for optimum reliability. This commissioning guide outlines responsibilities for the electrical and installation contractors for 24/7/365 continuous monitoring and automated testing of fire/smoke dampers.

To support NFPA and fire code requirements for scheduled testing, all fire, smoke and combination fire/smoke dampers shall be wired to a monitoring and testing system (MTS) capable of continuously monitoring the health and status of all life safety devices within the network. The MTS shall have an automated testing feature with a 24 hour integrated time clock to facilitate staged testing during scheduled shut down events. The system shall also include a manual test feature to facilitate inspection of a single damper within the network. MTS shall be connected to a set of contacts at each device.

Contacts shall be linked directly to damper blades to ensure positive blade position. MTS shall be programmed and commissioned by a factory authorized commissioning agent following established ISO9001 standards.

Ruskin's Webinars

Ruskin’s Wednesday Webinars for 2013 have been announced! Join us each Second Wednesday of the month from February through December @ 2:30 – 3:30 central (US) time. You only need to register once for all webinars and reminders will automatically be sent to you. Webinar topics are listed below:

July 10, 2013
Sound Control Basics and ASAP Demo


August 14, 2013
Ruskin Air Curtains: New Food Service Certification


September 11, 2013
Louvers: Ruskin Extreme Louver Solutions


October 9, 2013
Zone Control: System or Standalone Control


November 13, 2013
Ruskin Bubble Tight Dampers: One size does NOT fit all!


December 11, 2013
Control Dampers for EX-Extreme Environments, GEN-Generator Systems and SC- Severe Cold

Once registered you will receive an email confirming your registration with information you need to join the Webinar.

For other relevant searches, you might want to try:

(01730) Execution
(01810) Commissioning
(05500) Metal Fabrication
(07210) Building Insulation
(08310) Access Doors and Panel
(10300) Fireplaces and Stove
(13850) Detection and Alarm
(15800) Air Distribution
(15822) Dampers
(01 73 19) Installation
  (01 91 00) Commissioning
(05 50 00) Metal Fabrications
(07 21 00) Thermal Insulation
(08 31 13) Access Doors and Frames
(10 22 23.13) Wall Screens
(10 30 00) Fireplaces and Stoves
(23 30 00) HVAC Air Distribution
(23 33 13) Dampers
(28 30 00) Electronic Detection and Alarm