architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share

Wind-Resistant Tectum IIIW Roof Deck Panels now Miami-Dade NOA Approved

 

Wind-Resistant Tectum IIIW Roof Deck Panels now Miami-Dade NOA Approved

Tectum® IIIW Roof Deck panels from Armstrong Building Solutions are now Miami-Dade NOA (Notice of Acceptance) approved. Ideal for use in hurricane prone areas, the three-in-one composite panels provide sound absorption, insulation, and a nailable surface that accepts a wide variety of roofing materials.

Tectum IIIW Roof Deck panels are comprised of a 1-1/2" or thicker Tectum substrate, 3-to8-inch thick extruded polystyrene (XPS) insulation, and 19/32" plywood sheathing with a slip-resistant surface. Components are bonded with code-listed structural adhesives. The Tectum substrate is composed of rapidly renewable and FSC-certified aspen wood fiber and contributes to LEED® V4 criteria.

High Wind Uplift Resistance

The panels have a wind uplift resistance of up to 321 lbs/sq ft. and can be used in high wind installations in either low or high slope applications. The panels can span up to 60" and feature a 50-pound design load and a diaphragm shear of up to 786 dsn/lf.

In addition to wind resistance, the panels have a Noise Reduction Coefficient (NRC) of up to 0.60 indicating they absorb 60% of the sound that strikes them, thereby providing predictable acoustics. They also feature a thermal insulation R-value of up to 44 and a textured interior finish that can be painted up to six times without affecting acoustic or fire properties.

By providing noise absorption, insulation, and a nailable surface in one panel, Tectum IIIW Roof Decks are much faster and easier to install than the multi-step installation of
acoustical steel deck systems.

#ArmstrongBuildingSolutions #Tectum

For other relevant searches, you might want to try:

(03 50 00) Cast Decks and Underlayment
(03 51 13) Cementitious Wood Fiber Decks
(03 51 16) Gypsum Concrete Roof Decks
(06 12 00) Structural Panels
(06 12 13) Cementitious Reinforced Panels
(06 12 16) Stressed Skin Panels
(06 16 63) Cementitious Sheathing
(07 16 00) Cementitious and Reactive Waterproofing
(07 16 13) Polymer Modified Cement Waterproofing
(07 16 16) Crystalline Waterproofing
(07 16 19) Metal Oxide Waterproofing
(07 20 00) Thermal Protection
(07 22 00) Roof and Deck Insulation
(07 22 13) Asphaltic Perlite Concrete Deck
(07 22 16) Roof Board Insulation
(07 41 13) Metal Roof Panels
(07 42 00) Wall Panels
(07 42 13) Metal Wall Panels
(07 42 29) Terracotta Wall Panels
(07 92 19) Acoustical Joint Sealants
  (08 40 00) Entrances, Storefronts, and Curtain Walls
(09 06 00) Schedules for Finishes
(09 06 00.13) Room Finish Schedule
(09 06 70) Schedules for Wall Finishes
(09 23 00) Gypsum Plastering
(09 23 13) Acoustical Gypsum Plastering
(09 23 82) Fireproof Gypsum Plastering
(09 26 13) Gypsum Veneer Plastering
(09 51 00) Acoustical Ceilings
(09 51 13) Acoustical Panel Ceilings
(09 51 23) Acoustical Tile Ceilings
(09 51 33) Acoustical Metal Pan Ceilings
(09 54 00) Specialty Ceilings
(09 58 00) Integrated Ceiling Assemblies
(09 77 00) Special Wall Surfacing
(09 80 00) Acoustic Treatment
(09 81 00) Acoustic Insulation
(09 83 00) Acoustic Finishes
(09 84 00) Acoustic Room Components
(09 94 00) Decorative Finishing