architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share

New WoodWorks Grille – Forté Ceiling and Wall Panels from Armstrong Feature Notched Backers

 

New WoodWorks Grille – Forté Ceiling and Wall Panels from Armstrong Feature Notched Backers

With the introduction of WoodWorks® Grille – Forté Ceiling and Wall Panels, Armstrong offers the beauty of solid wood in the industry’s largest selection of standard grille designs. Notched alignment backers improve the structure, minimizing the naturally occurring twist of solid wood.

The enhanced panels feature 33 standard configurations in 4', 6', and 8' lengths to minimize the need for customization. Coordinating solid wood trims are available in 4" and 6" depths. The panels can be installed in ceilings, walls, or to create ceilingto-wall transitions. In addition, varying panel lengths and heights can be selected to create a dynamic installed visual.

Five design configurations feature an open area of at least 70 percent to minimize sprinkler installation below a finished ceiling, achieving a less cluttered visual and an open aesthetic with reduced materials cost.

Custom options, including unique panel configurations and lengths and additional wood species and finishes, are also available.

Eleven Standard Finishes

WoodWorks Grille – Forté panels are available in 11 standard finishes on solid poplar. The finishes are tinted to replicate naturally occurring wood tones. The new finishes include Bleached Grey, Classic Grey, Carbon Grey, Rich Mahogany, Antique Oak, Red Oak, English Chestnut, Golden Maple, Dark Oak, Natural Walnut, and Forest Walnut.

Black acoustic infill panels hide the plenum for a clean, finished visual, providing Total Acoustics® performance with a Noise Reduction Coefficient (NRC) of up to 0.85 and a Ceiling Attenuation Class (CAC) of up to 35.

MEP Integration and Suspension

Integrated downlighting solutions from USAI® Lighting are available for WoodWorks Grille – Forté ceiling panels. These downlighting solutions are certified for fit and finish and engineered to be supported by standard Armstrong suspension systems for use in all areas, including seismic DEF zones. The panels install on familiar, heavy-duty Prelude® suspension systems with pre-drilled backer holes to eliminate splitting for long-term durability.

The panels are part of the CleanAssure™ family of cleanable, disinfectable panels, suspension systems, and trim that help make spaces cleaner and healthier.

WoodWorks Grille – Classics

The WoodWorks Grille – Classics line of solid wood ceiling and wall panels is now available in 15 standard finishes. WoodWorks Grille – Classics installs with a traditional backer, dowel, or backer-and-dowel.
For more information about WoodWorks Grille – Forté and WoodWorks Grille – Classics, visit armstrongceilings.com/grille.

@ArmstrongCeiling #ArmstrongCeiling

For other relevant searches, you might want to try:

(09 50 00) Ceilings
(09 51 00) Acoustical Ceilings
(09 51 13) Acoustical Panel Ceilings
(09 51 14) Acoustical Fabric-Faced Panel Ceilings
(09 51 23) Acoustical Tile Ceilings
(09 51 26) Acoustical Wood Ceilings
(09 51 33) Acoustical Metal Pan Ceilings
(09 53 00) Acoustical Ceiling Suspension Assemblies
(09 54 00) Specialty Ceilings
(09 54 16) Luminous Ceilings
(09 54 19) Mirror Panel Ceilings
  (09 54 23) Linear Metal Ceilings
(09 54 26) Linear Wood Ceilings
(09 54 33) Decorative Panel Ceilings
(09 54 43) Stretched-Fabric Ceiling Systems
(09 54 46) Fabric-Wrapped Ceiling Panels
(09 54 53) Fiberglass Reinforced Panel Ceilings
(09 56 00) Textured Ceilings
(09 56 13) Gypsum-Panel Textured Ceilings
(09 57 00) Special Function Ceilings
(09 58 00) Integrated Ceiling Assemblies
(09 84 00) Acoustic Room Components