architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share

Hydrophilic and Mastic Waterstops from JP Specialties

 

Hydrophilic and Mastic Waterstops from JP Specialties

Modified Chloroprene Hydrophilic Waterstop

Type NB190® is a modern, hydrophilic chloroprene rubber waterstop with unmatched durability and water sealing capabilities. Manufactured NON-BENTONITE, modified chloroprene rubber, Type NB190® more than doubles its original size (400% in 36 days) when exposed to water. This expansion creates an effective compression seal within joints of limited to no movement. Type NB190® can expand and reexpand unlimited times with virtually no loss of physical properties. Additionally, Type NB190® has excellent resistance to many chemicals, is heat-resistant, and is safe for drinking water.

Earth Shield® Modified Chloroprene Hydrophilic Waterstop is used as a fluid-tight diaphragm, running along the joint, for water treatment plants, wastewater treatment plants, and fluid containment structures. Earth Shield® Modified Chloroprene Hydrophilic Waterstops are intended for non-moving construction joints only.

Chemical Resistant Strip Applied Waterstop

Earth Shield® CR125 Chemical Resistant Strip Waterstop is designed to prevent the passage of aqueous hydrocarbons through non-moving concrete joints in environmental engineered concrete structures. The product aggressively bonds to most substrates and is unaffected by rain or wet conditions during installation.

Mastic Waterstop for Concrete Cold Joints

Earth Shield® Type 10 is a high-quality, self-sealing mastic waterstop which prevents water from penetrating non-moving joints in concrete construction.

Hydrophilic Butyl/Bentonite Strip Applied Waterstop

Earth Shield® Type 20 & Type 23 Hydrophilic Butyl Rubber Waterstops are designed to swell when exposed to water, yet maintain a solid structural integrity that will not deteriorate due to uncontrolled expansion, unlike many of the traditional, clay-based waterstops currently on the market. This swelling ability prevents the passage of water through concrete construction joints. Type 20 & 23 waterstops are fast, easy, and economical to install. Simply apply Earth Shield® Primer to the existing concrete, firmly press the waterstop to the primed surface, and place your second pour of concrete. No splitting of forms or difficult field welding is necessary to achieve a watertight seal.

Waterstop Primer for Earth Shield® Waterstops

Earth Shield® Strip Applied Waterstop Primer is a water-based adhesive primer suitable for Type 10, 20, 23, and CR125 waterstops.

@waterstopking #waterstopking #waterstop #dewalt #concrete

For other relevant searches, you might want to try:

(03 11 00) Concrete Forming
(03 11 13) Structural Cast-in-Place Concrete Forming
(03 11 16) Architectural Cast-in Place Concrete Forming
(03 11 19) Insulating Concrete Forming
(03 11 23) Permanent Stair Forming
(03 15 00) Concrete Accessories
(03 15 13) Waterstops
(07 01 90.71) Joint Sealant Rehabilitation
(07 01 90.81) Joint Sealant Replacement
(07 06 90.13) Joint Sealant Schedule
(07 84 43) Joint Firestopping
(07 92 00) Joint Sealants
(07 92 13) Elastomeric Joint Sealants
  (07 92 16) Rigid Joint Sealants
(07 92 19) Acoustical Joint Sealants
(08 44 23) Structural Sealant Glazed Curtain Walls
(32 01 17.61) Sealing Cracks in Asphalt Paving
(32 01 19.61) Sealing of Joints in Rigid Paving
(32 01 29.63) Subsealing and Stabilization
(32 12 73) Asphalt Paving Joint Sealants
(32 13 73) Concrete Paving Joint Sealants
(32 13 73.13) Fuel-Resistant Concrete Paving Joint Sealants
(32 13 73.16) Field-Molded Concrete Paving Joint Sealants
(32 13 73.19) Compression Concrete Paving Joint Sealants
(33 01 30.61) Sewer and Pipe Joint Sealing
(33 01 30.62) Manhole Grout Sealing