architecture - engineering - construction
AECinfo.com

About Monitored Edge Link

Monitored Edge Link

The Miller Edge Model gate and door edge transmitter is designed to eliminate the need to hard wire sensing edges to motor controls. It is easily mounted and wired to the gate or door edge sensor. When the Sensing Edge comes into contact with an obstruction, a closed circuit signal is created and is sent to the transmitter. The transmitter relays the signal to the receiver that is wired to the stop or reverse terminals in the motor controls.

MEL-K20 MEL (Monitored Edge Link) Transmitter and Receiver

MEL provides a wireless transmission from a Sensing Edge to operator controls eliminating the need for hard wired coil cords or retractable reels. The MEL system includes a transmitting unit that wire to a monitored edge sensor and a receiving unit. MEL has a built-in feature to detect the presence and function of a monitored entrapment protection device. If the device detects a fault in the system, MEL features LED indicators to simplify diagnostics.

MEL-RX20 MEL (Monitored Edge Link) Receiver

MEL-RX20 receives a monitored Sensing Edge signal from the MEL-TX20 transmitter eliminating the need for hard wired coil cords or retractable reels. Operates on 12-24vAC/DC.MEL-RX20 features LED indicators for simplified diagnostics.

MEL-TX20 MEL (Monitored Edge Link) Transmitter

MEL-TX20 transmits a monitored Sensing Edge signal to the MEL-RX20 receiver eliminating the need for hard wired coil cords or retractable reels. Operates on two (2) "AA" lithium batteries and is housed in a NEMA4 enclosure.

MWRT02 Receiver and Transmitter

Includes single channel receiver (MWR02A) and transmitter (MWT02). The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.

MWRTA02 Receiver and Transmitter with Audible Low Battery Alarm

Includes single channel receiver (MWR02A) and transmitter (MWTA02) with audible low battery alarm. This feature that activates when the battery has only 25% of its life remaining, indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals. The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.

MWR02A Single Channel Receiver

The receiver will operate on either 12 or 24 volt AC or DC and provides N.O. or N.C. output. For use with MWT02 or MWTA02 transmitter.

MWTA02 Sensing Edge Transmitter

Wirelessly transmits signal to compatible receiver (MWR02A)

MWTA02 Sensing Edge Transmitter with Audible Low Battery Alarm

Includes a built in Audible Alarm feature that activates when the battery has only 25% of its life remaining, indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals. For use with MWR02 or MWR03 receiver.

MWR03 3-channel Receiver

Works with most gate and commercial door operators. The one receiver is capable of receiving signals from up to 3 different input devices.

MWHT01: Hand Held Transmitter

One button single channel remote control transmitter with visor clip. 9 switch control for easy code setting

Mini Keyfob Transmitter

Single button remote control with visor clip.

ANT-R: Rigid Antenna, Insulated

Use to increase signal reception when needed.

ANT-K: Antenna Cable

COAX Cable and connector block. Use to increase range when needed.

TB-01 Transmitter Mounting Bracket

Aluminum mounting bracket with pre-drilled holes and slots for easy mounting to 2” round posts.

MWCK04: Communicator Kit

Includes MWCKT04 edge transmitter and MWCKR04 receiver. This kit is designed to provide a fully reliable, self checking communication between the 4-wire Sensing Edge and the door or gate motor operator.

MWCT04: Communicator Transmitter

For use with MWCKR04 receiver.

MWCR04: Communicator Receiver

For use with MWCKT04 transmitter.

Brochures for Monitored Edge Link

Brochures for Monitored Edge Link
Preview Description Format Size Open
Miller Edge Product Catalog
At work or at home: making your world a safer place.
HTML   Open
Aviation Safety

Making your airport a safer place. Sensing edges & bumpers, photo optics, sensing mats for:

  • Sensing solutions for automated areas
  • Secure areas & concessions
  • Boarding bridges & loading equipment
  • Aircraft maintenance
  • Hangar doors
  • Baggage handling areas
  • Parking lots & garages
  • Fire station & loading dock doors
HTML 8.7 MB Open
How sensing edges work
Sensing edges for automated gates and sensing edges for motorized doors: principles, electrical configuration, wiring diagram.
HTML 24 kB Open


Request for Information / Request a Catalog from Miller Edge, Inc. about Monitored Edge Link
 
(Please check companies and/or products above.)
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.  
     


News archive:
MEL-K315 Monitored Edge Link (MEL) Transmitter and Receiver (May 01, 2018)
MEL-K315 Monitored Edge Link (MEL) Transmitter and Receiver (Sep 03, 2016)
Puzzled by the New UL 325 Gate Standard? Miller Edge has the missing pieces (Mar 02, 2016)
Miller Edge Monitored Edge link Passes UL Testing (Jul 24, 2012)

02820 - Fences and Gate
08340 - Special Function Door
08990 - Glazed Curtain Wall Restoration
13700 - Security Access and Surveillance
08 01 44 - Operation and Maintenance of Curtain Walls
08 34 00 - Special Function Doors
28 13 00 - Access Control
32 31 00 - Fences and Gates