architecture - engineering - construction
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share blog

Benefits of specifying complete masonry veneer wall systems

January 23, 2019

Benefits of specifying complete masonry veneer wall systems

This is part one of a seven-part series of blog entries about the benefits of specifying and building with manufacturer-tested and warrantied wall systems compared to specifying individual components. Benefits include a much faster design and specification process, proven component compatibility, faster component installation and better performance, plus the peace of mind that comes from knowing all components are proven compatible and will perform as specified. Part one describes the components of a masonry veneer wall system and the tests a wall system must pass to provide optimal performance.

A masonry cavity wall system must successfully perform multiple functions throughout the life of the building. A proper wall is expected to manage moisture, air, and heat, contain fire, and hold up the structure itself. For a wall to perform all these functions, specifications should include all the products necessary for the components to work together.

For the contractor, building a masonry cavity wall is just as challenging as specifying it is for the architect. Contractors rely on the architect for highly precise drawings and specifications so they can produce an accurate bid. They want to be able to build with familiar, proven methods and materials that are compatible and readily available through distribution.

For these reasons, specifying a complete wall system with all the components tested and warrantied together can offer many advantages to the design professional, such as helping support risk management. The design professional’s ability to thrive depends on his or her ability to provide timely documentation for the building’s performance.

Components of a masonry veneer wall system

The structural components forming the basis of the substrate may be steel or wood studs or concrete masonry units (CMUs). On the outside is the weather-resistant component—the cladding or masonry veneer. Between those are three functional component categories that complete the wall system and make the wall perform: moisture/air, thermal, and structural management.

Moisture/air management relies on:

  • an air- or water-resistive barrier (WRB);
  • a vapor barrier;
  • through-wall flashing (including mortar dropping collection and weep vents); and
  • water- and air-sealing washers on fasteners.

Thermal management involves:

  • insulation between the stud framing;
  • continuous insulation (CI) outside and over the framing; and
  • fire safing insulation.

Structural management depends on:

  • masonry anchors;
  • wall ties; and
  • water- and air-sealing washers on fasteners.


Having all the right components in the wall is not enough. A true wall system must have passed extensive testing proving the components, as a system, meet the code-mandated performance criteria and are physically and chemically compatible. Further, the system must pass industry-standard tests, such as:

  • National Fire Protection Association (NFPA) 285
    Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Nonloadbearing Wall Assemblies Containing Combustible Components;
  • ASTM E119
    Standard Test Methods for Fire Tests of Building Construction and Materials;
  • ASTM E2307
    Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-scale, Multistory Test Apparatus (used only for joint firestopping);
  • ASTM E331
    Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference; and
  • ASTM E2357
    Standard Test Method for Determining Air Leakage of Air Barrier Assemblies.

Individual product components of the system can also provide the protection of a warranty that covers them against defects. In the event there is a problem, unified and cooperative solutions are best rather than multiple companies acting separately.

Be sure to come back to this blog for part two to learn about moisture management, including a discussion of water-resistive barriers and air barriers.

Company: Mortar Net Solutions®

Product: TotalFlash® Panel

Of: Herbert Slone, RA, and Art Fox



Air Control

AIRFLOW-IQ Electronic Air Measuring (January 2, 2019)


Importance of a Well-Drained Masonry Wall (November 1, 2018), Thermal performance and energy savings with polycarbonate glazing systems (July 16, 2018), High Performance Insulated Wall System a Game Changer for Architects (November 22, 2017), Sto launches impact resistance program (September 4, 2017), Make your buildings look good with uniquely designed polycarbonate products for building exteriors (September 19, 2016), Download True Home Comfort. Right onto your IOS or Android device with the new Icynene Homeowner App! (June 29, 2016), Continuous Insulation (ci) Systems (June 27, 2016), Spray Foam Insulation In A Humid Region (May 30, 2016), Icynene Spray Foam: Water absorption comparison to other insulations (May 4, 2016), 3 Reasons to Insulate Your Crawlspace with Spray Foam Insulation (March 30, 2016)


Louver and Architectural Solutions (August 23, 2018), How to Choose the Right Perforated Grille for Your Project (August 9, 2018), Architectural Wall Louvers (November 23, 2017), Ruskin’s IAQ50 air flow measuring control damper solves Las Vegas air curtain challenge (September 20, 2017), Custom Ornamental Bronze Grilles (August 4, 2017), Blackened Steel for Architectural Design (July 19, 2017), Finally a Hands Free Solution to Stop Bathroom Mold with the New Enhanced Broan® InVent™ Series (July 14, 2017)

Wall Panels

StonePly lightweight natural stone panels (December 21, 2018), Non-destructive testing: when safety & success must be absolutely assured (November 9, 2018), Waterproof Laminated DIY Shower & Bathroom Wall Panels & Kits (October 22, 2018), Meeting modern trends in multifamily construction (October 17, 2018), Daylight modeling services (September 10, 2018), Design Spotlight: Controlling Summer Sun (August 3, 2018), Morintegrated - Design Like a Kid Again (July 24, 2018), Design spotlight: enhancing the grid (June 3, 2018), Elevare™ Mullion High Wall System (May 16, 2018), LuxCore FRP Fusion Wall Panels by Decorative Ceiling Tiles (May 1, 2018)


PVC Waterstop for Concrete (November 30, 2018), Importance of a Well-Drained Masonry Wall (November 1, 2018), Waterproof Laminated DIY Shower & Bathroom Wall Panels & Kits (October 22, 2018), Gateway Arch Expansion (September 22, 2018), Waterproof and protect below-grade slabs and perimeter walls (July 18, 2018), Penetron project: Melaka Harbour City, Malacca, Malaysia (June 11, 2018), How to Fluid-Proof Circular Joints in Concrete (March 26, 2018), An introduction to waterstop (February 28, 2018), Stainless Steel Waterstop for High Heat Applications (October 18, 2017), Distinctive dual towers built on Penetron (October 12, 2017)